STAMPED STEEL SIDE PLATES
Engineered to be lighter and easier to install, the ½ to 3 tonne model TS trolleys are specifically designed to be robust and durable, without unnecessary weight and bulkiness.
LOW MINIMUM TURN RADIUS
For curved beams where tight turns are required, Kito’s TS trolleys allow a low minimum turn radius.
Fits Tapered or Flat-Flanged Beams
TS trolley wheels are adjustable to work with both tapered and flat-flanged beams, allowing you to use existing equipment without customization. Lifetime-lubricated ball bearings also increase reliability and provide you with smooth operation while traversing a load.
NICKEL-PLATED LUGS AND SHAFT
We understand that working in the food industry brings on the heat. Certain amounts of heat can cause abrasion to trolley parts, which is why Kito's FTSP was purposefully built with nickel-plated lugs and shaft - for a longer lasting, and smoother operation.
WHITE EPOXY PAINT
Specifically used for Kito's food grade trolley, this paint produces a hard, chemical and solvent resistant finish - ensuring resistance to acids/alkali and water that may be present in food environments. And no need to worry about paint contamination... this epoxy paint is chip-resistant and will stay put.
- 1/2 to 2 metric tonnes
- Operating Conditions: -40° to +60° Celsius
- Safety lugs supplied standard
FOOD GRADE FEATURES
- White epoxy paint
- Food Grade grease
- Nickel-plated lugs and shaft
- Rubber bumpers
- Variety of suspenders
- A strong and rigid lightweight, compact design
- Nickle-plated lugs and shaft for abrasion resistance
- Contoured wheels that fit both tapered and flat-flange beams
- Adjustable flange width to fit a wide variety of beam flange widths.
- Maintenance-free low friction design. Lubricated for life.
- Push trolley: Suited to applications involving greater traversing distances
|Capacity (tonne)||Model||a||b||c||d||e||f||g||h||i||j||k||m||Capacity (tonne)||Model|
|½||FTSP2005||182||102 - 305||84||68||60||46||404 (max)||B - 45||60||82||B - 30||19||½||FTSP2005|
|1||FTSP2010||236||172 - 305||112||85||69||56||424 (max)||B - 48||71||106||B - 30||28||1||FTSP2010|
|2||FTSP2020||280||154 - 305||131||104||76||69||450 (max)||B - 27||85||127||B - 30||34||2||FTSP2020|
* All measurements in millimeters (mm)
|Capacity (tonne)||Model||Minimum Radius for Curve (mm)||Standard Flange (mm)||Standard Drop (ft)||Ship Weight (lbs)|
|Standard||W20 Extension||W30 Extension|
|½||FTSP2005||1100||50 -102||103 - 203||204 - 305||---||10|
|1||FTSP2010||1300||58 - 127||128 - 203||204 - 305||---||18|
|2||FTSP2020||1500||82 - 153||---||154 - 305||---||31|