Edcl .25t
Kito logo dark


Single-handed operation. Single-phase power.

Add an ergonomic cylinder control to Kito’s variable-speed ED hoist that operates on standard 115 V and you have a recipe for incredible productivity. The EDCL is at home on any production line, while still being small enough to move between job sites. It’s a formidable combination that’s sure to add valuable flexibility to any operation.

Get a Quote
  • 120 Volts
Kito52222 rc

Ergonomic In-Line Handgrip Control

The ergonomic, in-line handgrip control allows for single-handed operation, which gives the operator a free hand to safely guide and position the load.

Kito52220 rc

Easy-Touch High/Low Speed Selection

The easy-touch rocker switch above the handgrip allows you to quickly select between low and high speeds. Finger-turn knobs provide flexibility to externally adjust operating speeds from 0–100 percent.

Hooks rc

Quick-Switch Removable Bottom hook

For specific applications where you need an alternative lifting accessory, the EDCL gives you the option to easily remove the standard bottom hook and attach a variety of below-the-hook material handling devices that safely fit your application.

High Speed Motor

The EDCL electric hoist is a quick-lifting, single-phase speed demon available in a variety of ergonomic configurations. It's compact DC motor reduces weight, generates less heat and maintains duty cycles to keep production moving.


Standard Double-Braking System

Get double the protection with a Weston-style mechanical load brake plus a regenerative brake.

  • 100 to 480 kilograms
  • Single and dual speed
  • CSA approved
  • ASME B30.16 Safety Standard
  • ASME HST-1 Performance Standard
  • IP44 environmental protection
  • Load-bearing parts are only stressed to 20% of their limit at rated capacity
  • Dual Speed Units Available
  • Plastic, canvas or steel chain containers
  • Lift Lengths can be customized to suit requirements
  • Hook or manual trolley mount
  • TMH Mini Trolley designed to work exclusively with the ED hoist
  • Ergonomic control for easy one-handed operation
  • Easy-Touch High/Low Speed Selection
  • Quick-Switch Removable Bottom hook for insertion of a variety of below-the-hook devices
  • Die cast aluminum frame
  • Low headroom profile
  • Weather tight construction resists dust and water
  • Precision induction hardened, spur gears immersed in oil bath ensure quiet, smooth operation and long life
  • Abrasion and corrosion resistant load chain is made from heat-treated alloy steel
  • Grade 80
  • Long-lasting, heavy-duty cast iron construction
  • Forged carbon steel opens gradually without fracturing under excessive loads.
  • Bottom hook swivels 360 degrees
  • Self-closing top and bottom hooks with heavy-duty hook latch
  • Heat-treated, deep-groove ball and needle bearings are immersed in an oil bath
  • Impact-resistant plastic push button with molded strain relief. Adjustable low speed on dual-speed pendant models
  • IP65 dust-tight and watertight environmental protection
  • In-line cylinder control permits one-handed operation
  • Adjustable High/Low Speeds: Easy touch-finger turn nobs for quick selection from high to low speed
  • Weston-style mechanical load brake and regenerative brake
  • Single phase
  • Voltage: 120-1-60 volt
  • Horse Power: .4 to .8 hp
  • Duty Cycle: 30%ED
  • Compact DC motor with rectifier for AC current
  • An integrated high-performance friction clutch prevents damaging overloads and overtravel
  • Upper limit switch prevents overtravel

Plus sign Click to enlarge


Capacity (tonne) Model C a d e f h i j k
100kg EDCL10SD 925 371 187 187 200 120 80 25 340
240kg EDCL24SD 955 428 205 223 219 135 84 25 362

* All measurements in millimeters (mm)


Capacity (tonne) Model Max Lift (ft) Headroom (in) Lift Speed (ft/min) Hoist Motor H.P. Rated Current (amps) Load Chain Falls Ship Weight (lbs)
100 kg EDCL10SD 6 37 43/10 0.4 5 1 33
240 kg EDCL24SD 6 38 44/10 0.8 10 1 42