TCK Large Capacity Air Powered Hoist

The hoist that just keeps going.

With 100% duty rating, fine-feathering controls, and reduced noise levels, there’s no question the TCK will meet all your production needs.  Smooth starts and stops with variable-speed operation provide extremely accurate load positioning and control, and the high speed lifts will guarantee to improve efficiency.

Unlimited Duty Cycle

No coffee break needed – the TCK has an unlimited duty cycle built for long and demanding work shifts. You can continually operate the hoist without worrying about damage from too many starts per hour, allowing you to get the work done on your schedule.

PIPE-AWAY EXHAUST

No need to worry about oil spatter - direct your exhaust anywhere that best suits the application, including outside or to another room.

Fine Feathering Control

The spring-loaded, multi-vane motor design allows you to place and position a load exactly where you need it. Gradually control the lift with very fine feathering movements both up and down, even at low speeds.

Reduced Noise Levels

Achieve quiet operation and dampened noise levels with the external muffler. The TCK’s air-tight body contributes to its comfortable noise levels and efficient use of air. 82 dBA and below.

CAPACITY
  • 3 & 6 tonnes
STANDARDS
  • ASME B30.16
OPTIONS
  • Plain and geared trolley mount available
  • Pendant or cord control
BODY
  • Resistant in even the harshest environments, high-strength cast-iron housing stands up to the toughest demands
CONTROLS
  • Available with pendant or cord control
  • Very fine feathering movements both up and down, even at low speeds
GEARS
  • 3-step planetary gear box
CHAIN SYSTEM
  • Nickel plated, corrosion-resistant chain
  • Steel chain guide
HOOKS
  • Forged carbon steel opens gradually without fracturing under excessive load
  • Bottom and top hooks swivel 360 degrees
  • Self-closing top and bottom hooks with heavy-duty hook latch
OPERATION
  • Pendant and cord control
  • Outstanding control for fine feathering movements using a spring-loaded multi-vane motor design
  • Spring-loaded vanes maintain constant seal against cylinder wall
  • Scotch-Brite muffler with threaded hole to pipe exhaust away from hoist
  • Noise level: 82dBA and below
BRAKE
  • Fail-safe Self-Adjusting Disc Brake
MOTOR
  • Spring-loaded multi-vane
  • Air supply: 60-90 psi
  • 20-micron air filter or finer
  • Speed control: full range variable speed control
OPERATING CONDITIONS
  • -20˚C to +70˚C

Click to enlarge

Click to enlarge

Dimensions

Capacity (tonnes) Model Headroom C a b d e g h i
3 TCK3000P 21.1 576 312 310 264 33 188 160
6 TCK6000P2 30.3 576 371 310 264 43 244 160

* All measurements in millimeters (mm) - except headroom (C-inches)

Specifications

Capacity (tonnes) Model Std. Lift (ft) Ship Weight (lbs) Maximum Speed - 90 PSI (ft/min) Max Lift (ft) Load Chain Falls Weight per 5ft of Lift (lbs)
Up Down Chain Pendant
w/Load w/o Load w/Load w/o Load
3 TCK3000P 10 225 18 37 38 23 125 30 1 11.5
6 TCK6000P2 10 295 9 18 19 12 62 30 2 23

Click to enlarge

Click to enlarge

Dimensions

Capacity (tonnes) Model Headroom C a b d e g h i
3 TCK3000P 21 576 312 310 264 33 188 160
6 TCK6000P2 30 576 371 310 264 43 244 160

Specifications

Capacity (tonnes) Model Std. Lift (ft) Ship Weight (lbs) Maximum Speed - 90 PSI (ft/min) Max Lift (ft) Load Chain Falls Weight per 5ft of Lift (lbs)
Up Down Chain Pendant
w/Load w/o Load w/Load w/o Load
3 TCK3000P 10 223 18 37 38 23 125 ---- 1 11.5
6 TCK6000P2 10 293 9 18 19 12 62 ---- 2 23

Click to enlarge

Click to enlarge

Dimensions

Capacity (tonne) Model Headroom C F a b e g h k n r t
3 TCKP3000P 21.5 3.3~6 320 325 79 33 148 135 152 30 36
6 TCKP6000P2 33.4 6~8.6 447 480 104 43 185 170 195 89 70

* All measurements in millimeters (mm) - except headroom (C-inches)

Specifications

Capacity (tonnes) Model Std. Lift (ft) Ship Weight (lbs) Maximum Speed - 90 PSI (ft/min) Max Lift (ft) Load Chain Falls Weight per 5ft of Lift (lbs)
Up Down Chain Pendant
w/Load w/o Load w/Load w/o Load
3 TCKP3000P 10 271 18 37 38 23 125 30 1 11.5
6 TCKP6000P2 10 507 9 18 19 12 62 30 2 23

Click to enlarge

Click to enlarge

Dimensions

Capacity (tonne) Model Headroom C F a b e g h k n r t
3 TCKP3000C 21.5 3.3~6 320 325 79 33 148 135 152 30 36
6 TCKP6000C2 33.4 6~8.6 447 480 104 43 185 170 195 89 70

* All measurements in millimeters (mm) - except headroom (C-inches)

Specifications

Capacity (tonnes) Model Std. Lift (ft) Ship Weight (lbs) Maximum Speed - 90 PSI (ft/min) Max Lift (ft) Load Chain Falls Weight per 5ft of Lift (lbs)
Up Down Chain Pendant
w/Load w/o Load w/Load w/o Load
3 TCKP3000C 10 269 18 37 38 23 125 --- 1 11.5
6 TCKP6000C2 10 505 9 18 19 12 62 --- 2 23

Click to enlarge

Click to enlarge

Dimensions

Capacity (tonne) Model Headroom C F a b e g h k n r t v X(ft)
3 TCKG3000C 21.5 3.3~6 792 325 403 33 148 134 152 30 36 183 10
6 TCRK6000C2 33.4 6~8.6 754 480 371 43 185 170 195 86 70 213 10

* All measurements in millimeters (mm) - except headroom (C-inches)

Specifications

Capacity (tonnes) Model Std. Lift (ft) Ship Weight (lbs) Maximum Speed - 90 PSI (ft/min) Max Lift (ft) Load Chain Falls Weight per 5ft of Lift (lbs)
Up Down Chain Pendant
w/Load w/o Load w/Load w/o Load
3 TCKG3000C 10 284 18 37 38 23 125 --- 1 11.5
6 TCRK6000C2 10 551 9 18 19 12 62 --- 2 23

Click to enlarge

Click to enlarge

Dimensions

Capacity (tonne) Model Headroom C F a b e g h k n r t v X (ft)
3 TCKG3000P 21.5 3.3~6 792 325 403 33 148 134 152 30 36 183 10
6 TCKG6000P2 33.4 6~8.6 754 480 371 43 185 170 196 86 70 213 10

* All measurements in millimeters (mm) - except headroom (C-inches)

Specifications

Capacity (tonnes) Model Std. Lift (ft) Ship Weight (lbs) Maximum Speed - 90 PSI (ft/min) Max Lift (ft) Load Chain Falls Weight per 5ft of Lift (lbs)
Up Down Chain Pendant
w/Load w/o Load w/Load w/o Load
3 TCKG3000P 10 284 18 37 38 23 125 30 1 11.5
6 TCKG6000P2 10 551 9 18 19 12 62 30 2 23

Click to enlarge

Click to enlarge

Dimensions

Capacity (tonne) Model Headroom C F a b e g h k n r t
3 TCKM3000P 29.5 3.94~6 595 442 266 33 125 127 140 35 43
6 TCKM6000P2 34.1 4.92~7 661 503 274 43 140 140 155 35 58

* All measurements in millimeters (mm) - except headroom (C-inches)

Specifications

Capacity (tonne) Model Standard Lift (ft) Pendant L (ft) Maximum Speed - 90 PSI (ft/min) Traversing Speed (ft/min) Minimum Radius For Curved (mm) Load Chain Diameter (mm) x Chain Fall Lines Net Weight (Lbs) Weight For Additional 5ft of lift (Lbs)
Up Down
w/Load w/o Load w/Load w/o Load
3 TCKM3000P 10 6 18 37 38 23 65 1300 12.5 x 1 326 11.5
6 TCKM6000P2 10 6 9 18 19 12 65 2000 12.5 x 2 461 23

Documents