Mr trolley
Kito logo dark

MR

One smooth operator.

How do you move five tonnes across a factory floor safely and easily? Here’s how: add an MR motorized trolley to your Kito ER2 electric hoist and you’ll increase productivity and decrease unwanted movement so you can easily direct your load. Opt for an adjustable two-speed unit with a variable frequency drive (VFD) and you’ll also be able to set your speed preference and ensure super smooth starts and stops every time.

*The MR Trolley can only be used with the ER2 Hoist. 

 

Get a Quote
  • 220 Volts
  • 440 Volts
  • 575 Volts

Easy Access Suspension

Quickly change from hook to lug for trolley mount configurations on most models. The MR trolley’s external suspension pins allow you to make rapid modifications if needed.


Vfd

Adjustable Two-Speed Trolleys

Get excellent traversing motion and load control with a variable frequency drive (VFD). The MR trolley’s programmable VFD provides gradual starts and stops to reduce unwanted movement while travelling.

Side rollers adjusted

Innovative Side-Guide Roller System

Designed for very smooth travel along the beam, the MR motorized trolley uses an innovative side-guide roller system that keeps the load controlled and on track while traversing.

Bumpers adjusted

Drop Stops and Rubber Bumpers

Drop stops and rubber bumpers not only provide additional security for the operator, they also protect the equipment against collisions.

CAPACITY
  • Single Speed: ⅛ to 20 Metric Tonnes
  • Dual Speed: ⅛ to 20 Metric Tonnes
STANDARDS
  • Built-in drop stops provide additional security from over travel off the beam
  • Thermal overload protection
  • Case hardened wheels
OPTIONS
  • Extended suspension shafts for wide flange beams
FRAME
  • Steel side plates with aluminum frame
  • Compact profile offering low headroom
GEARS
  • Precision, induction heated, durable alloy steel gears
WHEELS
  • Contoured wheels fit both tapered and flat-flange beams.
  • Four ball bearing supported side rollers enhance smooth trolley motion and reduce wear of the wheels and beam
ERGONOMIC PUSHBUTTON STATION
  • Impact resistant plastic with molded strain relief to avoid damage from pulling on the push button cord
  • Environmental Protection: IP65 Dust/Water tight
OPERATION
  • Single speed: 2-button (momentary contacts)
  • Dual speed: 2-button (momentary contacts) with emergency On/Off (maintained contacts)
  • Convenient “tow bar” supports and guides the power supply and festoon system
BEARINGS
  • All steel sealed ball bearings
BRAKE
  • Extremely durable and reliable pull-rotor brake with precision load control during deceleration
MOTOR
  • Totally enclosed, non-ventilated, thermally protected
  • Three phase
  • Single Speed – 30 Min.duty cycle
  • Dual Speed – 30/10 Min. duty cycle with VFD
  • Voltage: 208-230/460/575-3-60 (dual speed models are not re-connectable)
CONTROLS
  • Located on one central electrical panel
  • Control Voltage: 110 Volts
  • Simple to operate plug in connectors
  • Count Hour (CH) Meter
  • Adjustable, dual speed, under the cover variable frequency drive (VFD)
OVERTRAVEL PROTECTION
  • Rubber bumpers
  • Provides protection from collisions and is supplied standard

Specifications

Capacity (tonne) Model Travel Speed Minimum Radius for Curve (mm) Trolley Motor H.P. Ship Weight (lbs)
1 MR2010L 40 800 0.54 74
1 MR2010S 80 800 0.54 74
2 MR2020L 40 800 0.54 100
2 MR2020S 80 800 0.54 100
3 MR2030L 40 1000 0.54 123
3 MR2030S 80 1000 0.54 123
5 MR2050L 40 1800 1.0 183
5 MR2050S 80 1800 1.0 183
10 MR2100L 40 2500 1.0 400
20 MR2200L 40 --- 1.0 x 2 760

Specifications

Capacity (tonne) Model Travel Speed (ft/min) Minimum Radius for Curve (mm) Trolley Motor H.P. Ship Weight (lbs)
1/8 MR2001IS_ 80/13 800 0.54 66
¼ MR2003IS_ 80/13 800 0.54 66
½ MR2005IS_ 80/13 800 0.54 66
1 MR2010IS_ 80/13 800 0.54 66
MR2015IS_ 80/13 800 0.54 84
2 MR2020IS_ 80/13 800 0.54 84
MR2025IS_ 80/13 1000 0.54 103
3 MR2030IS_ 80/13 1000 0.54 103
5 MR2050IS_ 80/13 1800 1.0 156

Specifications

Capacity (tonne) Model Travel Speed Minimum Radius for Curve (mm) Trolley Motor H.P. Ship Weight (lbs)
1/8 MR2001L_D 40 800 0.54 66
¼ MR2003L_D 40 800 0.54 66
½ MR2005L_D 40 800 0.54 66
1 MR2010L_D 40 800 0.54 66
MR2015L_D 40 1000 0.54 84
2 MR2020L_D 40 1000 0.54 84
MR2025L_D 40 1000 0.54 103
3 MR2030L_D 40 1000 0.54 103
5 MR2050L_D 40 1800 1.0 156

Specifications

Capacity (tonne) Model Travel Speed (ft/min) Min. Radius for Curve (mm) Trolley Motor H.P. Ship Weight (lbs)
1/8 MR2001SD5 80/20 800 0.4/0.1 75
¼ MR2003SD5 80/20 800 0.4/0.1 75
½ MR2005SD5 80/20 800 0.4/0.1 75
1 MR2010SD5 80/20 800 0.4/0.1 75
MR2015SD5 80/20 800 0.4/0.1 92
2 MR2020SD5 80/20 800 0.4/0.1 92
MR2025SD5 80/20 1000 0.9/0.2 110
3 MR2030SD5 80/20 1000 0.9/0.2 110
5 MR2050SD5 80/20 1800 0.9/0.2 165