ER2C Ergonomic Electric Chain Hoist

Single-handed operation. Three-phase power.

Ergonomically designed, this 3-phase cyclinder control ER2C Series provides all that you need for a safe and easy operation. It features a Guardian Smart Brake technology - an electrical fail-safe design and an in-line grip for one-handed operation allowing the user's free hand to position the load easily. Wherever the location, the sealed body allows this dual speed hoist to withstand indoor or outdoor hazardous environments. The ER2C is engineered to deliver comfort, safety and peak performance. 

Smart Brake Technology

The ER2C‘s Guardian Smart Brake has an electrical fail-safe design that uses DC current to control brake activation. The fast activation drastically reduces wear on the brake discs, preserving the correct brake gap. The result is a maintenance-free braking system with a 10-year/2,000,000 activation cycle warranty.

EXTREME-DUTY TEFC MOTOR

Equipped with thermal overload protection and cooling fins on all four sides of the motor housing, the ER2C's totally enclosed fan-cooled motor (TEFC) efficiently dissipates heat, allowing for industry-leading duty ratings.

Ergonomic In-Line Hand Grip Control

The ergonomic, in-line hand grip control allows for single-handed operation, which gives the operator a free hand to safely guide and position the load.

Count Hour Meter

The count hour meter records the hoist’s starts and run time. This gives maintenance personnel an accurate record of the hoist's operating profile, letting them customize its maintenance schedule to optimize the hoist’s life and improve workplace safety.

CAPACITY
  • Single Speed: 1/8 to 1/4 metric tonnes
  • Dual Speed: 1/8 to 1/4 metric tonnes
STANDARDS
  • CSA approved
  • ASME B30.16
  • ASME H4
  • ISO M5
  • FEM 2m or 1Am
  • IP55 dust-tight and watertight
  • Slip clutch to protect the hoist against over travel and overload damage
  • Plastic
BODY
  • Die cast aluminum frame
  • Completely sealed body for environmental protection
  • Low headroom
GEARS
  • Precision, induction-heated, durable alloy steel helical gears submersed in an oil bath
LOAD CHAIN
  • Ultra-strong high-performance nickel-plated load chain, with unique short link pitch for greater resistance to fatigue and wear
  • Grade 80, certified to DIN standards
CHAIN GUIDE
  • Long-lasting, heavy-duty cast iron construction, easily replaced without disassembling hoist
HOOKS
  • Forged carbon steel opens gradually without fracturing under excessive loads. Bottom hook swivels 360 degrees
  • Self-closing top and bottom hooks with heavy-duty hook latch
ERGONOMIC CYLINDER CONTROL
  • Ergonomic Cylinder Control Ideal for repetitive tasks- available in Adjustable 2-speed (220/440 volt) Dual Speed (575 volt)
CONTROLS
  • Controls located on a central electrical panel
  • Control Voltage: 110 volts
  • Adjustable, dual-speed, under-the-cover VFD (220 and 440 volt dual speed models)
  • Simple to operate plug-in connectors
BEARINGS
  • High-quality, anti-friction ball and roller design
BRAKE
  • DC current electromagnetic brake stays engaged until powered (Industry leading 10 year warranty)
  • Minimum brake torque of 200% at full load
MOTOR
  • Three phase
  • Standard Voltage: 220/440/575 volts
  • 60 hertz
  • Class B
  • Extreme duty, totally enclosed, fan-cooled (TEFC) squirrel cage
  • Motor fin, fan blade and fan cover design for optimum air flow
OVERLOAD PROTECTION
  • Friction clutch located in the gearbox between motor and load gear prevents damage to hoist in the event of excessive overloading
OVERTRAVEL PROTECTION
  • Limit switch disables controls when load block reaches upper or lower travel limit
OPERATING CONDITIONS
  • Recommended for -20˚ to +40˚ C and humidity of 85% or lower
Choose product configuration below to view info:

Click to enlarge

*For informational purposes only, contact KITO for dimensional drawing

Dimensions

Capacity (tonne) Model a b C(Inches) D e f g h i j k L m n o p q r s
1/8 ER2C001HD 478 321 40 430 259 219 27 280 99 93 167 6 167 160 152 80 23.5 390 35.5
1/4 ER2C003SD 478 321 40 430 259 219 27 280 99 93 167 6 167 160 152 80 23.5 390 35.5

* All measurements in millimeters (mm)

Specifications

Capacity (tonne) Model Standard Lift (ft) Hoist Lifting Speed (ft/min) Hoist Motor H.P. Headroom (in) Rated Current (amps) 575V Load Chain Code Load Chain Falls Ship Weight (lbs) Weight per Additional 5ft of Lift (lbs)
1/8 ER2C001HD 6 55/11 0.75 40 1.4/0.9 KER2043 1 68 1
1/4 ER2C003SD 6 28/7 0.75 40 1.4/0.9 KER2043 1 68 1

Click to enlarge

*For informational purposes only, contact KITO for dimensional drawing

Dimensions

Capacity (tonne) Model a b C(Inches) D e f g h i j k L m n o p q r s
1/8 ER2C001IH 535 345 42 490 259 276 27 300 99 117 167 6 167 160 152 136 23.5 413 35.5
1/4 ER2C003IS 535 345 42 490 259 276 27 300 99 117 167 6 167 160 152 136 23.5 413 35.5

* All measurements in millimeters (mm)

Specifications

Capacity (tonne) Model Standard Lift (ft) Hoist Lifting Hoist Motor H.P. Headroom (in) Rated Current (amps) 220V Rated Current (amps) 440V Load Chain Code Load Chain Falls Ship Weight (lbs) Weight per Additional 5ft of Lift (lbs)
1/8 ER2C001IH 6 55/9 0.75 42 3.6 1.8 KER2043 1 68 1
1/4 ER2C003IS 6 36/6 0.75 42 3.6 1.8 KER2043 1 68 1

Click to enlarge

*For informational purposes only, contact KITO for dimensional drawing

Dimensions

Capacity (tonne) Model a b C(Inches) D e f g h i j k L m n o p q r s
1/8 ER2C001HD 478 321 42 490 259 219 27 280 99 93 167 6 167 160 152 80 23.5 390 35.5
1/4 ER2C003SD 478 321 42 490 259 219 27 280 99 93 167 6 167 160 152 80 23.5 390 35.5

* All measurements in millimeters (mm)

Specifications

Capacity (tonne) Model Standard Lift (ft) Hoist Lifting Speed (ft/min) Hoist Motor H.P. Headroom (in) Rated Current (amps) 575V Load Chain Code Load Chain Falls Ship Weight (lbs) Weight per Additional 5ft of Lift (lbs)
1/8 ER2C001HD 6 55 0.75 42 1.4 KER2043 1 68 1
1/4 ER2C003SD 6 35 0.75 42 1.4 KER2043 1 68 1